Mini excavator Phoenix 400 - 6.5 hp motor
This configuration is recommended for individuals wishing to do maintenance on their land and do some simple excavation work.
It is possible to adapt an auger or grapple at the end of an arrow.
Prices - 6.5 hp motor
|PH400 6.5 cv - Ready to use Version|
8 625,00 $
|PH400 6.5 cv - Welded and painted version|
6 850,00 $
|PH400 6.5 cv - Welded only version|
6 150,00 $
|PH400 6.5 cv - To weld, paint and assemble|
5 525,00 $
|TPS 5% + TVQ 9.975% applicable- Deposit of 750$ requested for an order|
Fill the for and return it to us by email or mail
Attention, the engine power does not increase the power of the machine, it only changes the use and maneuverability of the shovel when using it.
Empty weight: 640 kg
Total height: 1 700 mm
Overall width: 830 mm
Turret rotation angle: 210°/150° (right or Left)
Detachable arm on the walnut to allow digging along a wall
Maximum height (ground): 1m95 (bucket open)
Maximum depth (of the base): 2m22
Breaking force: 1,6 t
Air cooled engine
Type: Single cylinder, 4 stroke - 6,5 hp
Power: 4,1 kW
Cylinder capacity: 196 cc
Consumption: (100% charge): 1,9 L/h
Fuel tank capacity: 3,7 L
Hydraulic Pump: Dual Gear Pump 2,5 + 2,5 cc
Operating pressure: 140 bars
Flow rate: 5 + 5 l/min
Traction motor: Orbital
Hydraulic tank capacity: 25 l
Tracks of origin: 180x72x43
In the Kit version, hydraulic oil and paint are not supplied.
In the Welded and painted version, hydraulic oil is not supplied.